Universal Dry Fix Ridge Kit

Universal Dry Fix Ridge Kit

TIL-R Universal Dry Fix Ridge Kits are high quality, great value, mechanically fixed solutions which are suitable for most ridge and hip applications. (Additional components may be required for hips). Our Ridge Kits secure ridge tiles at the roof apex, are resistant to wind uplift and water penetration and are ventilated to BS 5534:2014 and BS 8612:2018 requirements.

Conforms with BS5250
Products suitable for high and low profile
Design resistances available upon request

TIL-R Universal Dry Fix Ridge Kit contains;

6m x Ridge Roll
10 x Ridge Batten Brackets
13 x Ridge Unions (polyethylene) with 39 Union Clips (polyamide)
13 100mm Stainless Steel Screws
13 x Stainless Steel Clamping Plates
13 x A2 Stainless Steel & EPDM Sealing Washers

Product Kits (Sold separately)

Data Sheet

Installation Guide

Typical Applications

Suitable for most hip and ridge applications

Suitable for high and low profile

Advantages

Resistant to wind uplift and water penetration

Quick and easy to fit

Mechanically fixed solution

No specialist tools required

6m length

Considerations

Installation must be done in dry weather

Detailed Product Specifications

TIL-R Universal Dry Fix Ridge Kit Extension Packs

Contains:

7 x Ridge Batten Brackets
7 x Ridge Unions (polyethylene) with 21 Union Clips
(polyamide)
7 x 100mm Stainless Steel Screws
7 x Stainless Steel Clamping Plates
7 x A2 Stainless Steel & EPDM Sealing Washers

TIL-R Rollable Ridge Vent

Material
Vapour permeable technical fabric with a corrugated aluminium strip down each edge, with a 2cm butyl strip attached to the underside. Aluminium and technical fabric glued and sewn together with threads resistant to environmental factors. Polyester lacquer coating – 15-25 µm

Colour: Black RAL 9005
Dimensions: Width: 310mm Length: 6m

TIL-R Ridge Union (polyethylene)

Dimensions: Thickness: 1.5mm
Material: Polyethylene

TIL-R Ridge Union Clip (polyamide)

Dimensions: Length 31.7cm
Material: Polyethylene

TIL-R Ridge Batten Bracket

Thickness: 1.5mm
Material: Perforated steel strip
Zinc Coating: 10 um
Bracket Spacing: 50mm

TIL-R Screw

Dimensions: Length: 100mm
Material: Stainless Steel

TIL-R Clamping Plate

Thickness: 1mm
Width: 24mm
Length: 50mm
Material: Stainless

Sealing Washer

Outside diameter: 12mm
Inside diameter: 5.3mm
Material: A2 Stainless Steel and Grey EPDM Sealer