Free Training
(01480) 302567
info@fix-r.co.uk

FIX-R > Products > EPDM Membranes > EPDM Accessories

EPDM Accessories

FIX-R provide a professional range of accessories for FIX-R EPDM membranes. Adhesives, primers and Pressure Sensitive (PS) accessories are available for virtually any penetration or detail.

FIX-R Roof Deck Adhesive (WBA)

  • Low Odour
  • Designed to be roller applied to flat roof surfaces

Roof Deck Adhesive
This high strength, low odour water based acrylic adhesive is specifically designed for use with FIX-R EPDM membrane to timber deck surfaces.

Available in 2.5L (7 – 10m² coverage), 5L (14 – 20m² coverage) and 15L pails (42 – 60m² coverage).

For full usage details refer to FIX-R EPDM Installation Guide.

Find your local stockist

FIX-R Bonding Adhesive

  • High Strength
  • Perfect for bonding FIX-R EPDM Membrane to horizontal and vertical surfaces
  • Designed to be roller applied to the substrate and sheet backing
  • Suitable for a range of surfaces

Roof Deck Adhesive
A high strength, solvent based bonding adhesive, specifically designed and manufactured for flat roofing installations. Suitable for a range of surfaces e.g. timber, brickwork, metal, PVC and concrete.

Available in 1L (1.5 – 2 m² coverage), 2.5L (4 – 5m² coverage) and 5L (8 – 10m² coverage).

For full usage details refer to FIX-R EPDM Installation Guide.
Find your local stockist

 

FIX-R EPDM Primer

Roof Deck Adhesive
FIX-R EPDM Primer is a solvent based product designed for one step cleaning and priming of EPDM and other suitable surfaces prior to the application of FIX-R Pressure Sensitive (PS) accessories such as 76mm PS Seam Tape, 152mm PS Cover Strip, 228mm PS Uncured Flashing, PS Pipe Seals and PS Walkway Pads.

Available in 0.5L and 1L containers.

For application details refer to FIX-R EPDM Installation Guide.

Find your local stockist

 

76mm Pressure Sensitive (P.S.) Secure Tape

  • Over 30% greater peel and sheer strength
  • Comes with clear poly backing for easier on site application

Roof Deck Adhesive
FIX-R PS Secure Tape is manufactured to precise width and thickness criteria with a clear poly backing for easier on site application. FIX-R PS Secure Tape offers over 30% greater peel and sheer strength when compared to market rivals. This tape is designed for use with FIX-R EPDM roofing systems to fuse the EPDM Membranes together resulting in long term seam strength.

Available in 30.5m long rolls.

For application details refer to FIX-R EPDM Installation Guide.

Find your local stockist

 

152mm Pressure Sensitive (P.S.) Cover Strip

  • Resists tearing, cracking and abrasion in all weather conditions

FIX-R 152mm PS Cover Strip is used for stripping in metal edging, drip edges, gravel stops and fastening plates. This tape consists of a 1.02mm semi cured EPDM strip laminated to a 0.89mm fully cured synthetic rubber based pressure sensitive adhesive.

Available in 152mm by 30.5m long rolls. Can be used when seaming with 76mm PS Secure Tape is not possible.

Must be used with FIX-R EPDM Primer, for full usage details refer to the FIX-R EPDM Installation Guide.

Find your local stockist

 

228mm Pressure Sensitive (P.S.) Uncured Flashing Tape

  • Easily adaptable to irregular shapes and surfaces
  • Easy application with clear poly backing

Roof Deck Adhesive
FIX-R PS Uncured Flashing Tape is easily moulded and highly adaptable to irregular shapes and surfaces. This self-curing tape is ideal for flashing and waterproofing of roof details such as pipes, corners, outlets and other penetrations.

Available in 228mm wide by 15.25m long rolls.

Must be used with FIX-R EPDM Primer, for full usage details refer to the FIX-R EPDM Installation Guide.

Find your local stockist

 

Pressure Sensitive (P.S.) Pipe Seals

  • Pre-applied Secure Tape on the base of the pipe seal gives fast and simple application
  • Ribbed collar for accurate cutting to pipe size
  • Stainless steel clamping ring

Roof Deck Adhesive
FIX-R PS Pipe Seals are cured, pre-moulded EPDM Flashings for round flat roof penetrations, with pre-applied secure tape to the base and a stainless steel clamping ring.

Available in two sizes – small 12.5 – 76mm and large 25 – 152mm in diameter.

Must be used with FIX-R EPDM Primer, for full usage details refer to the FIX-R EPDM Installation Guide.

Find your local stockist

 

Pressure Sensitive (P.S.) RUSS Strip

  • Ideal for additional membrane securement as needed
  • Ideal for perimeter securement and around penetrations

Roof Deck Adhesive
In common with most single ply material, EPDM will over time try and shrink by up to 10% back to the centre. The base tie-in controls the membrane movement and stops the membrane pulling away where the membrane turns up through an angle change. The rest of the movement is accommodated by the FIX-R Membrane and its ability to elongate by over 300%.

FIX-R PS RUSS Strip (Reinforced Universal Secure Strip) is used to mechanically secure EPDM Membranes to the substrate. The strip has tape pre-applied along one edge and can be installed horizontally or vertically in conjunction with Seam Fastening Plates below the EPDM Membrane for additional membrane securement.

Find your local stockist

Seam Fastening Plates

seam-fastening-plates-v1

Used with FIX-R RUSS Strip to securely clamp the RUSS to the vertical or horizontal surface. Must be used in conjunction with the appropriate fasteners for the substrate.

Find your local stockist

Water Cut-Off Mastic

  • Each tube covers 3 linear metres
  • Suitable to be used as a  compression type mastic, not as a sealant for wall chases or gaps

The FIX-R Water Cut-Off Mastic is a compression termination. This one part self-wetting mastic is used in a variety of situations where a compression termination of the FIX-R EPDM Membrane is required.

Lap Sealant

  • Fast, clean, simple finish to the flat roofing system

The FIX-R Lap Sealant cures off to give a cured rubber consistency. This allows the mastic bead to expand and contract with the environment. It’s ideal for sealing wall chase details and using as a finishing bead to compression type joints.

Find your local stockist

PS Walkway Pads

ps-walkway-pads

  • Excellent tear and puncture resistance
  • UV resistant
  • Slip resistant

FIX-R Pressure Sensitive Walkway Pads are designed to protect the membrane in those areas exposed to repetitive foot traffic.

FIX-R PS Walkway Pads must be installed at all traffic concentration points such as roof hatches, access doors, rooftop ladders, etc. regardless of traffic frequency. They must also be installed if regular maintenance (once a month or more) is necessary to service rooftop equipment.

Find your local stockist

Read our handy FIX-R EPDM FAQs here